FullDip Cherry Red
Cherry Red is a very hard colour to do properly. And not recommended for first time dips.
Quite poor coverage on its own.
100% recommend using this over the Grey Primer Base Colour
This will give a matte finish.
You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance.
You can make this metallic by simply adding the 'Metallic Maker' (see bottom).
2 light dust coats of grey primer.
2 wet coats grey primer.
Then at least 3 or 4 full wet coats.
Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI
Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI.
Self explanetory, shake and spray.
FullDip cans are 400ml.
Plastidip® aeros need warming.
Fulldip cans do not, but its a good habit to get into with ANY aerosol.
Fulldip 4 litre. Ready to go, shake, stir and pour into hopper and start spraying :)
Tinters / Drop-Ins
No measuring needed, simply pour the contents of the tinter into a CLEAR FullDip 4 litre or 1 US Gallon of PDS.
Make sure shake well and you get ALL the colourant out. Sometimes pigment settles and clumps at the bottom
You can add to another colour, but they are designed for a CLEAR
Instructions and video HERE
Will give you the base colour and colour to acheive the requested (shown above) colour.
Come in a matte or gloss finish
See our wheel kit explanation HERE
These kits will usually do upto a set of 19" front faces perfectly.
Order the correct kit in these stages;
Get the correct size for your car (email us if required)
The kit comes with a FullDip FD650. Upgrade gun to an Earlex HV2901 or and MS3000 (you can choose once you add a kit to the cart)
Add a PRO addon kit if required.
Add some Glossifier to make shiny.
RETURN & REFUND POLICY
A Full Dip 400ml spray covers up to 1.2 m2.
4 Litre Sprayable
Ready to spray
Covers and colour changes really easily
Lays super smooth
Wraps, protects and changes colour with matte finish. It can be removed by peeling it, as with PlastiDip®.
Full Dip's long research process makes them the pioneers in the liquid vinyl.
Full Dip in 4L format, premixed and ready to apply. For the correct application use either an Earlex or conventional compressor setup.
2016 NEW Formulation, with professional Auto Leveling Additives always perfect smooth finish
Non-Oxidation additives - stays peelable for more than 10 years!!
100% Manufactured in Europe (Spain)
How much FullDip is needed to paint my car? Depends on the size and the base color, but we can generalize as follows;
For small cars two tins
For medium three or four tins based on size (usually 3)
Large cars five tins
Full Dip Tinter/ Drop-In
Each 200ml drop in is easy to create the colours you want. Simply add the contents to any 4l FullDip and you have made your colour. Easy :)
Liquid Vinyl spray application, once dry becomes a tough elastic and durable film.
It can be easily removed.
Full dip can be cleaned with most soaps, and resists water, mud or pressure water cleaning.
No cracks or self peeling with the time.
For instructions see our Installation Guide.